Moscow, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
UDK 624.21 Мосты в целом. Конструктивные элементы мостов. Общие вопросы
The paper concerns the mechanism of bugholes formation (breach) in the waterproofing layer on the slope of the macro-roughness protrusion associated with the temperature and flow rate of the sprayed mixture, cooling time, width, and height of the macro-roughness protrusion. The point bugholes formation occurs on the slopes of areas with maximum irregularities (the greatest depth of the depression relative to the adjacent ledge). Taking into account the results of the production experiment, the research recommends ones to increase the temperature of the sprayed mixture to 70-80 °C to ensure the polymerization rate of the mixture up to 1-2 minutes. Meanwhile, the bubble of the vapor-air mixture does not have time to reach the surface of the sprayed layer and burst with the formation of a bugholes (a defect in the integrity of the waterproofing layer of the bridge structure). The paper shows the prospects of mass application of sprayed polymer three layer waterproofing of bridge structures and the accumulation of new theoretical knowledge in the construction and repairing of bridges.
waterproofing, bridges, spraying, heating, bughole, breach, low temperatures, bubbles
1. Ovchinnikov, I.G., Makarov, V.N. & Efanov, A.V. (2004) Bridge bed of road bridges using cast asphalt concrete and modern expansion joints. Saratov: Izd-vo Sarat. gos. tekhn. un-ta (in Russian).
2. Ovchinnikov, I.I., Ovchinnikov, I.G., Valiev, Sh.N. & Zhadenova, S.V. (2013) Systematization and comparative analysis of various types of waterproofing used on road bridge structures, Internet-zhurnal «Naukovedeniye», (5) [online]. Available at: https://naukovedenie.ru/PDF/56tvn513 (in Russian).
3. Borisov N.A. (2017) Waterproofing of construction objects by cold seamless spraying with liquid rubber, Sbornik materialov VI Mezhdunarodnoy nauchno-prakticheskoy konferentsii 13 avgusta 2017 g. Cheboksary: Izdatelstvo: OOO "Tsentr nauchnogo sotrudnichestva "Interaktiv plyus". pp. 220-227 [online]. Available at: www.interactive-plus.ru (in Russian).
4. Yankovsky, L.V., Kochetkov, A.V. & Kokodeeva, N.E. (2019) Technical normalization of macro-roughness of road surfaces of automobile and logging roads / under the general ed. of L.V. Yankovsky. Perm: Izd-vo Perm. nats. issled. politekhn. un-ta (in Russian).
5. Zadiraka, A.A., Kokodeeva, N.Ye. & Kochetkov, A.V. (2018) Physical and mechanical properties of polyurethane crushed stone for slopes of embankments and excavations of roads and railways, Russian Journal of Building Construction and Architecture, 4(40), pp. 50-60.
6. Dubinyak A.N. & Ovchinnikov I.I. (2020) Waterproofing materials for the protection of transport structures, Internet-zhurnal «Transportnyye sooruzheniya», 7(2), pp. 18 [online]. Available at: https://t-s.today/PDF/21SATS220.pdf (in Russian).
7. Ovchinnikov, I.G., Ovchinnikov, I.I., Telegin, M.A. & Khokhlov, S.V. (2014) Effective constructions of road clothes using asphalt concrete on bridge structures, Internet-zhurnal "Naukovedeniye", 1(20), pp.76 (in Russian).
8. Kamenskikh, A.N. (2023) The secret of durability. Practical work on video identification of the thermal field of the sprayed hot waterproofing layer using a thermal imager, Avtomobilnyye dorogi, (3), pp. 40-43 (in Russian).
9. Valiev, Sh.N., Kamenskikh, A.N., Petrovich, I.G. & Zhuravlev P.A. (2023) Device of sprayed polymer waterproofing of bridge structures based on thermophysical modeling and normalization of macro-roughness / under the scientific editorship of prof. A.V. Kochetkov. M.: OOO «Stroinformizdat» (in Russian).
10. Pratap, Singh Rautela. (2008) Waterproofing of Bridge Decks The Latest Technique and Material, National research council. NBM & CW, January.
11. Erik Haga, John. (1997) Bridge Decks Waterproofing and Wearing Course, Norwegian Public Roads Administration, January.
12. Eestindanud, Aleksander Kaldas. (2013) Sillatekkide asfaltkatendid (Asphalt pavements on bridge decks), EAPA arvamusraport, Detsember.
13. Karl Gunnar Holter. (2015) Testing of properties and constructability considerations of EVA-based sprayed membranes for waterproofing of tunnels, «SEE Tunnel: Promoting Tunneling in SEE Regio» ITA WTC 2015 Congress and 41st General Assembly, May 22–28.
