Our website uses cookies. By continuing to use this site, you agree to our use of cookies in accordance with this notice and the Terms of Use.
Submit manuscript
From Chemistry Towards Technology Step-By-Step
Journals / From Chemistry Towards Technology Step-By-Step / Volume 6 Issue 2 / Technological and operational properties of cathodic electrodeposition primer
UDC
667.6

TECHNOLOGICAL AND OPERATIONAL PROPERTIES OF CATHODIC ELECTRODEPOSITION PRIMER Technological and operational properties of cathodic electrodeposition primer

Published in From Chemistry Towards Technology Step-By-Step · Pages 133–139 · Rubric: Scientific articles
DOI: https://doi.org/10.52957/2782-1900-2025-6-2-133-139
Received: 15.05.2025 Accepted: 11.06.2025 Published: 29.06.2025 Language of publication: ENG
Authors
IV
Ivan Koltsov
AL
Aleksandr Ilyin
VA
Valentina Miloslavskaya
AR
Artem Khlopotinin
ABSTRACT
The paper considers the impact of various dispersants on the dispersion time of pigment paste for cathodic electrodeposition primer and on some properties of the formed coating. The authors demonstrate that a dispersant based on nonionic surfactants (tetramethyldecynediol) in ethylene glycol enables dispersion of pigments and fillers in aqueous medium to the required particle fineness of ~15 μm (by grindometer) in minimal time. When using this dispersant, the best coating properties are observed.
KEYWORDS
pigment paste, cathodic electrodeposition primer, grinding fineness, dispersant
Text References
Text
Text (PDF)
Read Download

1. Research and Markets: [official site]. Ireland, 2025. Available at: https://www.researchandmarkets.com/reports/5744285/electrocoating-market-report (accessed 09.04.2025).

2. Antsev V.Yu., Vitchuk N.A., Vitchuk P.V., Petrenko E.A. Improvement of automotive paint application process quality. Vestnik VSU, 2020, 16(5), 119–123. DOI:https://doi.org/10.36622/VSTU.2020.16.5.018 (in Russian).

3. Kvasnikov M.Yu., Zamshin V.A., Kudlo V.L., Ilina N.S., Chinov V.V., Nepochatov V.M. New technology for electrophoretic coating application on helicopter components operating under fretting corrosion conditions. Aviatsionnye materialy i tekhnologii, 2019, 4(57), 49–55. DOI:https://doi.org/10.18577/2071-9140-2019-0-4-49-55 (in Russian).

4. Goldscmidt A., Streitberger H.J. BASF Handbook on Basics of Coating Technology 2nd edition. Hanover: Vincentz Network, 2007, 694-696.

5. Kuznetsova V.A., Silaeva A.A., Zheleznyak V.G., Marchenko S.A. Modification of epoxy film-formers and curing agents used for paint coatings (review). Trudy VIAM, 2022, 5(111), 96–104. DOI:https://doi.org/10.18577/2307-6046-2022-0-5-96-111 (in Russian).

6. Usmanov Kh.A.U. Study of cathodic electrodeposition primer film formation process. TEKHnika, 2021, 1, 14 19. DOI:https://doi.org/10.24411/2181-0753/2021-100003 (in Russian).

7. Vasylina A.A., Ozhiganov V.V., Bakunin D.O., Ilyin A.A. Improving the dispersibility of water-dispersion primers. From Chemistry Towards Technology Step-By-Step, 2022, 3(4), 15-18. DOI:https://doi.org/10.52957/27821900_2022_04_15 (in Russian).

8. Voronina Yu.A., Krylova Yu.A., Tereshko A.E. Development of aqueous phase formulation for non-toxic paints. From Chemistry to Technology Step by Step, 2023, 4(2), 29-34. DOI:https://doi.org/10.52957/2782-1900-2024-4-2-29-34 (in Russian).

9. Heilen W. et al. Additives for Waterborne Coatings. Hanover: Vincentz Network, 2009, 21-27.

10. Churilov Yu.V., Silaeva A.A., Makarov A.V., Dolzhanskaya A.M. Development of pigment paste production technology based on epoxy-amine oligomer for coatings obtained by cathodic electrodeposition. ZhPKh, 2022, 95(9), 1137–1142. DOI:https://doi.org/10.31857/S0044461822090055 (in Russian).

11. Usmanov Kh.A.U. Selection of suitable binder for film-forming component of cathodic electrodeposition primer. TEKHnika, 2020, 1, 30-33. DOI:https://doi.org/10.24411/2181-0753/2020-10006 (in Russian).

12. Inakov T.K., Dolimova M.Ya., Makhamatova S.Kh., Kosimov A., Inakov K.T.U. Perspective selection of suitable binder for film-forming component of primer. Life Sciences and Agriculture, 2020, 3-2, 37-40. DOI:https://doi.org/10.24411/2181-0761/2020-10132 (in Russian).

13. Churilov Yu.V., Dolzhanskaya A.M., Silaeva A.A., Rodionova N.A., Tochilkina E.O., Kvasnikov M.Yu. Synthesis of water-soluble epoxyamine oligomers and preparation of coatings by cathodic electrodeposition method. Zhurnal SFU. Khimiya, 2022, 14(3), 361-367. DOI:https://doi.org/10.17516/1998-2836-0244 (in Russian).

14. GOST 31973-2013. Paint and varnish materials. Method for determining grinding fineness. Moscow: Standartinform, 2014, 11 p. (In Russian).

15. Vasylina A.A., Ozhiganov V.V., Miloslavskaya V.V., Bakunin D.O., Ilyin A.A., Indeykin E.A. Improvement of technological and operational properties of water-dispersion primer. Paint and Coatings Industry and Their Application, 2023, 1-2, 20-23. (In Russian).

16. GOST R 58144-2018. Distilled water. Specifications. Moscow: Standartinform, 2019, 14 p. (In Russian).

17. GOST 25271-93. Plastics. Liquid resins, emulsions or dispersions. Determination of apparent viscosity by Brookfield method. Moscow: Standards Publishing House, 1994, 14 p. (In Russian).

18. GOST 31939-2012. Paint and varnish materials. Determination of mass fraction of non-volatile substances. Moscow: Standartinform, 2014, 12 p. (In Russian).

19. GOST 31992.1-2012. Paint and varnish materials. Method for determining density. Part 1. Pycnometer method. Moscow: Standartinform, 2013, 12 p. (In Russian).

20. GOST 6356-75. Petroleum products. Method for determination of flash point in closed crucible. Moscow: Standards Publishing House, 1994, 7 p. (In Russian).

21. GOST 33290-2023. Paint and varnish materials for construction. General specifications. Moscow: Russian Institute for Standardization, 2023, 20 p. (In Russian).

22. ISO 15880:2000. Paints, varnishes and binders – Determination of MEQ value of water-based coating materials and binders. G.: International Organization for Standardization, 2000, 4 p.

23. GOST 21119.7-75. Organic dyes and inorganic pigments. Method for determination of specific electrical conductivity of aqueous extract. Moscow: IPK Standards Publishing House, 1999, 2 p. (In Russian).

24. GOST 25336-82. Laboratory glassware and equipment. Types, main parameters and dimensions. Moscow: Standartinform, 2009, 103 p. (In Russian).

25. GOST R 53228-2008. Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests. Moscow: Standartinform, 2010, 141 p. (In Russian).

26. GOST 8.423-81. State system for ensuring the uniformity of measurements. Mechanical stopwatches. Verification methods and means. Moscow: Standards Publishing House, 1981, 11 p. (In Russian).

27. GOST R 51691-2008. Paint and varnish materials. Enamels. General specifications. Moscow: Standartinform, 2009, 15 p. (In Russian).

28. GOST 31993-2013. Paint and varnish materials. Determination of coating thickness. Moscow: Standartinform, 2014, 16 p. (In Russian).

29. GOST 29309-92. Paint coatings. Determination of tensile strength. Moscow: IPK Standards Publishing House, 2004, 7 p. (In Russian).

30. GOST 4765-2024. Paint and varnish materials. Method for determining impact resistance of coatings. Moscow: Federal State Budgetary Institution "Institute for Standardization", 2024, 12 p. (in Russian).

31. GOST 31149-2014. Paint and varnish materials. Determination of adhesion by lattice cut method. Moscow: Standartinform, 2014, 16 p. (In Russian).

32. GOST 31975-2017. Paint and varnish materials. Method for determining gloss of paint coatings at 20°, 60°, 85° angles. Moscow: Standartinform, 2017, 24 p. (In Russian).

33. GOST 9.401-2018. Unified system of corrosion and aging protection. Paint coatings. General requirements and accelerated test methods for resistance to climatic factors. Moscow: Standartinform, 2018, 122 p. (In Russian).

34. GOST 8832-2024. Paint and varnish materials. Methods for preparing paint coatings for testing. Moscow: Russian Institute for Standardization, 2024, 12 p. (In Russian).

35. GOST 16523-97. Rolled thin-sheet carbon steel of high quality and ordinary quality for general purposes. Specifications. Moscow: Standartinform, 2008, 16 p. (In Russian).

36. GOST 9045-93. Cold-rolled thin-sheet steel of low-carbon high quality for cold stamping. Specifications. Moscow: Interstate Council for Standardization, Metrology and Certification, 1997, 13 p. (In Russian).

37. GOST 5632-2014. Alloyed stainless and corrosion-resistant, heat-resistant and heat-proof steels and alloys. Grades. Moscow: Standartinform, 2015, 52 p. (In Russian).

38. Kvasnikov M.Yu., Romanova O.A., Utkina I.F., Smirnov K.N., Kiselev M.R., Korolev Yu.M., Krylova I.A., Antipov E.M., Silaeva A.A. Obtaining metal-polymer coatings by joint cathodic electrodeposition of polymer electrolytes and metals. VMS. Series A, 2015, 57(4), 361-367. DOI:https://doi.org/10.7868/S2308112015040094 (in Russian).

39. Shestakova L.A. Features of thermally conductive copper-polymer paint coatings obtained by cathodic electrodeposition. Trends in Development of Science and Education, 2022, 33(92), 93-96. DOI:https://doi.org/10.18411/trnio-12-2022-572 (in Russian).

PDF Text JATS XML
The contact persons
Editor in chief
Dmitry Berezin
Deputy Editor in Chief
Igor Abramov
abramovig@ystu.ru
Executive secretary
Zhanna Chirkova
chirkovazhv@ystu.ru
1966
downloads
VAK RINC
© chemintech.ru
Agreement Personal data protection and processing policy Support Powered by Editorum, 2026 Instructions
Login or Create
* Forgot your password?