1. Buchanan, C. and Gardner, L. (2019), “Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges”, Engineering Structures, vol. 180, pp. 332-348. DOI:https://doi.org/10.1016/j.engstruct.2018.11.045.

2. Kanyilmaz, A., Demir, A.G., Chierici, M., Berto, F., Gardner, L., Kandukuri, S. Y., Kassabian, P., Kinoshita, T., Laurenti, A., Paoletti, I., du Plessis, A. and Razavi, N. (2022), “Role of metal 3D printing to increase quality and resource-efficiency in the construction sector”, Additive Manufacturing, vol. 50, p. 102541. DOI:https://doi.org/10.1016/j.addma.2021.102541.

3. Bedarf, P., Dutto, A., Zanini, M. and Dillenburger, B. (2021), “Foam 3D printing for construction: A review of applications, materials, and processes”, Automation in Construction, vol. 130, p. 103861. DOI:https://doi.org/10.1016/j.autcon.2021.103861.

4. Singh, S., Ramakrishna, S. and Berto, F. (2020), “3D Printing of polymer composites: A short review”, Material Design & Processing Communications, vol. 2, no. 2. DOI:https://doi.org/10.1002/mdp2.97.

5. Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F. and Vanaei, H.R. (2021), “An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application”, Engineered Regeneration, vol. 2, p. 1-18. DOI:https://doi.org/10.1016/j.engreg.2020.12.001.

6. Klyuyev, S.V., Klyuev, A. V. and Shorstova, E.S. (2019), “Fiber concrete for 3D-printing”, Stroitel'nye materialy i izdeliya [Construction materials and products], vol. 4, no. 2, p. 14-20 (In Russian).

7. Khan, M.S., Sanchez, F. and Zhou, H. (2020), “3D printing of concrete: Beyond horizons”, Cement and Concrete Research, no. 133. p. 106070. DOI:https://doi.org/10.1016/j.cemconres.2020.106070.

8. Nemova, D., Kotov, E., Andreeva, D., Khorobrov, S., Olshevsky, V., Vasileva, I., Zaborova D. and Musorina, T. (2022), “Experimental Study on the Thermal Performance of 3D-Printed Enclosing Structures”, Energies, vol. 15, no. 12, p. 4230. DOI:https://doi.org/10.3390/en15124230.

9. Feng, P., Meng, X., Chen, J. F. and Ye, L. (2015), “Mechanical properties of structures 3D printed with cementitious powders”, Construction and Building Materials, vol. 93, p. 486-497. DOI:https://doi.org/10.1016/j.conbuildmat.2015.05.132.

10. Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen C. and Dillenburger, B. (2018), “Particle-bed 3D printing in concrete construction – Possibilities and challenges”, Cement and Concrete Research, vol. 112, p. 50-65. DOI:https://doi.org/10.1016/j.cemconres.2018.05.018.

11. Ingaglio, J., Fox, J., Naito, C. J. and Bocchini, P. (2019), “Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates”, Construction and Building Materials, vol. 206, p. 494 503. DOI:https://doi.org/10.1016/j.conbuildmat.2019.02.065.

12. Hou, S., Duan, Z., Xiao, J. and Ye, J. (2021), “A review of 3D printed concrete: Performance requirements, testing measurements and mix design”, Construction and Building Materials, vol. 273, p. 121745. DOI:https://doi.org/10.1016/j.conbuildmat.2020.121745.

13. Şahin, H.G. and Mardani, A. (2023), “Mechanical properties, durability performance and interlayer adhesion of 3DPC mixtures: A state-of-the-art review”, Structural Concrete, vol. 24, no. 4, p. 5481-5505. DOI:https://doi.org/10.1002/suco.202200473.

14. Buswell, R.A., Leal, de Silva W.R., Jones, S.Z. and Dirrenberger, J. (2018), “3D printing using concrete extrusion: A roadmap for research”, Cement and Concrete Research, vol. 112, p. 37-49. DOI:https://doi.org/10.1016/j.cemconres.2018.05.006.

15. García-Alvarado, R., Moroni-Orellana, G. and Banda-Pérez, P. (2021), “Architectural evaluation of 3d-printed buildings”, Buildings, vol. 11, no. 6, p. 254. DOI:https://doi.org/10.3390/buildings11060254.

16. Yang, L., Sepasgozar, S. M. E., Shirowzhan, S., Kashani, A. and Edwards, D. (2023), “Nozzle criteria for enhancing extrudability, buildability and interlayer bonding in 3D printing concrete”, Automation in Construction, vol. 146, p. 104671. DOI:https://doi.org/10.1016/j.autcon.2022.104671.

17. Xu, Y., Yuan, Q., Li, Z., Shi, C., Wu, Q. and Huang, Y. (2021), “Correlation of interlayer properties and rheological behaviors of 3DPC with various printing time intervals”, Additive Manufacturing, vol. 47, p. 102327. DOI:https://doi.org/10.1016/j.addma.2021.102327.

18. Ramezani, A., Modares, S., Dashti, P., GivKashi, M.R., Moodi, F. and Ramezanianpour, A.A. (2023), “Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures: A Review”, Buildings, vol. 13, no. 4, p. 945. DOI:https://doi.org/10.3390/buildings13040945.

19. Liu, D., Zhang, Z., Zhang, X. and Chen, Z. (2023), “3D printing concrete structures: State of the art, challenges, and opportunities”, Construction and Building Materials, vol. 405, p. 133364. DOI:https://doi.org/10.1016/j.conbuildmat.2023.133364.

20. Li, W., Lin, X., Bao, D.W. and Min Xie, Y. (2022), “A review of formwork systems for modern concrete construction”. Structures, vol. 38, p. 52-63. DOI:https://doi.org/10.1016/j.istruc.2022.01.089.

21. Volkova, A.A., Paykov, A.V., Stolyarov, O.N., Semenov, S.G. and Melnikov, B.E. (2015), “Structure and properties of textile reinforced concrete”, Magazine of Civil Engineering, vol. 59, no. 7, p. 50-56. DOI:https://doi.org/10.5862/MCE.59.5.

22. Volkova, A., Paykov, A., Semenov, S., Stolyarov, O. and Melnikov, B. (2016), “Flexural Behavior of Textile-Reinforced Concrete”, MATEC Web of Conferences, vol. 53, p. 01016. DOI:https://doi.org/10.1051/matecconf/20165301016.

23. Quadflieg, T., Leimbrink, S., Gries, T. and Stolyarov, O. (2018) “Effect of coating type on the mechanical performance of warp-knitted fabrics and cement-based composites”, Journal of Composite Materials, vol. 52, no. 19, p. 2563-2576. DOI:https://doi.org/10.1177/0021998317750003.