Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate

Olga Solovyeva; Elena Nikitina; Mikhail Soloviev

doi:10.52957/27821900_2021_03_46

UDC 678

STUDY OF THE EFFECT OF THE VULCANISING GROUP INGREDIENTS MECHANOCHEMICAL PROCESSING ON THE PROPERTIES OF THE FILLED RUBBER COMPOUND AND NATURAL RUBBER VULCANIZATE Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate

АА Аа

Published in From Chemistry Towards Technology Step-By-Step · Volume 2, Issue 3 · Pages 46–51 · Rubric: Scientific articles

DOI: https://doi.org/10.52957/27821900_2021_03_46

Received: 10.09.2021 Accepted: 21.09.2021 Published: 23.09.2021

Authors

Olga Solovyeva

Elena Nikitina

Mikhail Soloviev

ORCID

Olga Solovyeva

Academic degree: candidate of technical sciences

Yaroslavl State Technical University Associate Professor · Yaroslavl

Elena Nikitina

Academic degree: candidate of technical sciences

Yaroslavl State Technical University Associate Professor · Yaroslavl

Mikhail Soloviev

Academic degree: doctor of physical and mathematical sciences

Yaroslavskiy gosudarstvennyy tehnicheskiy universitet professor · kafedra Informacionnye sistemy i tehnologii · Russian Federation · Ярославль

ORCID

ABSTRACT

The purpose of the article is to study the effect of mechanochemical processing (MCP) of vulcanising group components on the properties of rubber compound and natural rubber vulcanizate containing technocarbon N 330 with a small addition of high-dispersed silica filler. The processing of both individual components: zinc oxide as accelerator and all components of sulphuric curing group increases the speed and degree of rubber structuring during the main period of vulcanization, reduces the tendency of rubber to reversion at the postvulcanization stage. This increases both the conditional stress and tensile strength of rubber.

KEYWORDS

natural rubber, vulcanising group, mechanochemical processing, vulcanisation characteristics, vulcanisate, deformation strength properties

Text

Text (PDF)

Read Download

1. Avakumov E.G. Mehanicheskie metody aktivacii himicheskih processov. Novosibirsk: Nauka. 1989. 306 s.

2. Kajdas C. General Approach to Mechanochemistry and its Relation to Tribochemistry. Chapter 11. 2013. 240 p. DOI:https://doi.org/10.5772/50507.

3. Tricker A.W. Hot spot generation, reactivity, and decay in mechanochemical reactors. Chemical Engineering Journal. 2020. V. 382. R. 122954. DOI: 10.1002 / advs.201700132.

4. Kajdas C. Mechanical Activation of Chemical Process. Materials Sciences and Applications. 2015. N 6. R. 60-67. DOI:https://doi.org/10.4236/msa.2015.61008.

5. Barton S.S. Acidic and basic sites on the surface of porous carbon. Carbon. 1997. V. 35. N 9. P. 1361–1366.

6. Razumovskii S.D. Mechanochemical methods of activating processes of biomass pretreatment. Catalysis in Industry. 2011. V. 3. R. 23-27. DOI:https://doi.org/10.1134/S2070050411010107.

7. Juhász A.Z. Aspects of mechanochemical activation in terms of comminution theory. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 1998. V. 141. R. 449-462.

8. Boldyrev V.V. Fundamental'nye osnovy mehanicheskoy aktivacii, mehanosinteza i mehanohimicheskih tehnologiy. Novosibirsk: Izd-vo Sibirskogo otdeleniya RAN, 2009. 343 s.

9. Moiseevskaya G.V., Shpakov M.Yu., Razd'yakonova T.N. Ob effektivnosti mehanoaktivacii shungitovogo napolnitelya rezin marki taurit TS-D. Ch. 1. Svoystva shungitovogo poroshka. Kauchuk i rezina. 2012. № 6. S. 14-16.

10. Moiseevskaya G.V., Shpakov M.Yu., Razd'yakonova T.N. Ob effektivnosti mehanoaktivacii shungitovogo napolnitelya rezin marki taurit TS-D. Ch. 2. Rezul'taty ispytaniy shungitovyh napolniteley v rezinovyh smesyah. Kauchuk i rezina. 2012. № 6. S. 16-20.

11. Petrova N.N. Mehanohimicheskaya aktivaciya prirodnyh ceolitov kak sposob polucheniya polifunkcional'nyh modifikatorov rezin. Kauchuk i rezina. 2008. № 4. S. 17-22.

12. Makarov V.M., Solov'eva O.Yu., Nikitina E.L. Vliyanie mehanohimicheskoy obrabotki ingredientov na strukturu i svoystva rezinovyh smesey i rezin na osnove 1,4-cis-poliizoprena. Izvestiya vysshih uchebnyh zavedeniy. Seriya: Himiya i himicheskaya tehnologiya. 2020. T. 63. Vyp. № 5. S. 89-93. DOI:https://doi.org/10.6060/ivkkt.20206305.6162.

13. Mahlis F.A., Fedyukin D.L.Terminologicheskiy spravochnik po rezine. M.: Himiya, 1989. 400 s.

14. Kandyrin K.L., Sedov A.S. Primenenie pribora RPA dlya ocenki svoystv napolnennyh rezin. Voprosy prakticheskoy tehnologii izgotovleniya shin. 2010. № 1 (50). S. 93-100.

15. Pichugin A.M. Materialovedcheskie aspekty sozdaniya shinnyh rezin. M.: Mashinostroenie, 2008. 383 s.

16. Solov'eva O.Yu., Vetoshkin A.B., Gudkov S.V., Nikitina E.L. Modifikaciya smesey na osnove etilen-propilenovogo kauchuka i kremnekislotnogo napolnitelya. Izvestiya vuzov. Himiya i himicheskaya tehnologiya. 2021. T. 64. № 2. S. 81-86. URL: https://doi.org/10.6060/ivkkt.20216402.6309

17. Markelov V.G., Solov'ev M.E. Modelirovanie processa vulkanizacii tolstostennyh rezinovyh izdeliy. Izvestiya vuzov. Himiya i himicheskaya tehnologiya. 2007. T. 50. № 4. S. 95-98.

18. Markelov V.G., Solov'ev M.E. Ocenka parametrov modeli reakcii vulkanizacii shinnyh rezin v ramkah formal'noy kineticheskoy shemy. Izvestiya vuzov. Himiya i himicheskaya tehnologiya. 2008. T. 51. № 4. S. 40-41.

PDF JATS XML

Editor in chief

Dmitry Berezin

Deputy Editor in Chief

Igor Abramov

abramovig@ystu.ru

Executive secretary

Zhanna Chirkova

chirkovazhv@ystu.ru

4442

downloads

GOST

Solovyeva O. Y., Nikitina E. L., Soloviev M. E. Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate // From Chemistry Towards Technology Step-By-Step. 2024. no. 3. pp. 46-51. DOI: https://doi.org/10.52957/27821900_2021_03_46. (Date of access 01.10.2026).

MLA

Olga Solovyeva, Nikitina E. L., Soloviev M. E.. "Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate." From Chemistry Towards Technology Step-By-Step 2.3 (2024): 46-51. DOI: https://doi.org/10.52957/27821900_2021_03_46.

APA

Solovyeva O. Y., Nikitina E. L., Soloviev M. E. (2024). Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate. From Chemistry Towards Technology Step-By-Step, 2(3), 46-51. https://doi.org/10.52957/27821900_2021_03_46

Chicago

Olga Solovyeva, Nikitina E. L., Soloviev M. E.. "Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate." From Chemistry Towards Technology Step-By-Step 2, no. 3 (2024): 46-51. https://doi.org/10.52957/27821900_2021_03_46.

WIKI

{{cite journal | author = Solovyeva O. Y., Nikitina E. L., Soloviev M. E. | title = Study of the effect of the vulcanising group ingredients mechanochemical processing on the properties of the filled rubber compound and natural rubber vulcanizate | journal = From Chemistry Towards Technology Step-By-Step | year = 2024 | volume = 2 | issue = 3 | pages = 46-51 | doi = 10.52957/27821900_2021_03_46 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

Confirmation