Institute of Chemical and Energy Technology Problems, the Siberian Branch of the Russian Academy of Sciences (IPCET SB RAS), (Laboratory of Mineral Materials Science)
Biysk, Barkaul, Russian Federation
UDK 621.926 Оборудование для дробления, измельчения, помола, для твердых и мягких материалов (например, универсальные мельницы). Оборудование для дробления и измельчения твердых материалов
The article summarizes the first effort of research in creating and operating experimental and industrial installation for garnetting of cellulose-based materials. The experimental device was created on the basis of a household grain crusher, supplemented with a replaceable pegboard rotor, provided with an adjustable inlet and equipped with a suction pneumatic transport of the unfolded product. The device performs garnetting, mechanical grading, and pneumatic transportation of cellulose materials. The article provides examples of garnetting process studies of various materials, such as wood and cotton celluloses of various commodity forms and brands, waste paper, cellulose laboratory prototypes. Recommendations are formulated on the design parameters and garnetting process methods of pulp lap from sulfite wood cellulose from various manufacturers. Recommended specific capacity is 2.5 kg/(m3∙s). The specific energy intensity of the garnetting process is 75 kJ/kg. The power reserve coefficient of the electric motor is 1.5. The circumferential speed of the rotor’s outer edge is at least 45 m/s. The moisture content of the initial pulp ranges from 5 to 10% (rel.). The size of the sieve cells is 5 mm. The specific productivity of mechanical classification of loosened pulp is 1.5 kg/(m2∙s). The bulk density of the unfolded product is from 30 to 120 kg/m3. The experimental setup can be used for carrying out various experimental studies of the cellulose garnetting processes and development of the necessary experimental samples in the laboratory. The article provides an example of creating an industrial plant with a capacity of 500 kg/h for the production of technical sodium-carboxymethyl cellulose of various brands based on these recommendations, followed by an analysis of the experimental unit operation. The industrial plant is based on a hammer mill and is equipped with a suction pneumatic transport. The industrial plant is used for the cellulose folder garnetting for the needs of industrial cellulose derivatives production.
cellulose, pulp, mechanical crusher, pneumatic transport, mechanical grading, fibrous materials, pretreatment of plant raw materials, experimental research, industrial production, garnetting
1. Makarova I.V., Kunichan V.A., Sevodina K.V., Volkova N.N. Legaev, A.I. Optimization of a solid-phase method for producing carboxymethyl cellulose. Vestnik altaiskoi nauki. 2014. № 4 (22). P. 311–314 (in Russian).
2. Niskovskaya M.Yu., Chernetskaya N.V., Ulyanov B.A., Bragina O.A., Bogdanov V.S. To the question of obtaining carboxymethyl cellulose ethers by the suspension method. Sbornik nauchnykh trudov Angarskogo gosudarstvennogo tekhnicheskogo universiteta. 2006. № 1. P. 176–179 (in Russian).
3. Svetlov S.A. Development of equipment for the production of sodium carboxymethyl cellulose. Khimicheskoe i neftegazovoe mashinostroenie. 2019. V. 55. № 6. P. 3–6 (in Russian).
4. Gorshkova T.A., Mikshina P.V., Guryanov O.P., Chelnokova S.B. Formation of the supramolecular structure of the plant cell wall. Overview. Biochemistry. 2010. V. 75. № 2. P. 196–213 (in Russian).
5. Lev-Yadun S. Plant fibers: initiation, growth, model plants, and open questions. Physiology of plants. 2010. V. 57. № 3. P. 323–333.
6. Loginova S.V., Latuga A.A. Fluffed pulp structure model. Vestnik Moskovskogo gosudarstvennogo universiteta lesa - Lesnoi vestnik. 2016. V. 20. № 2. P. 132–136 (in Russian).
7. Podgorbunskikh E.M., Bulina N.V., Bychkov A.L., Lomovsky O.I. Disordering of the crystalline structure of cellulose upon mechanical activation. Zhurnal strukturnoi khimii. 2018. V. 59. № 1. P. 204–211 (in Russian). URL: https://doi.org/10.1134/S0022476618010328
8. Huang L., Wu Q., Wang Q., Wolcott M. Mechanical activation and characterization of micronized cellulose particles from pulp fiber. Industrial Crops and Products. 2019. V. 141. 111750. URL: https://doi.org/10.1016/j.indcrop.2019.111750
9. Lee H., Mani S. Mechanical pretreatment of cellulose pulp to produce cellulose nanofibrils using a dry grinding method. Industrial Crops and Products. 2017. V. 104. P. 179–187. URL: ttp://dx.doi.org/10.1016/j.indcrop.2017.04.044
10. Kukhlenko A.A., Orlov S.E., Karpov A.G., Ivanova D.B., Ivanov O.S., Vasilishin M.S., Bereshchinova M.N. Investigation of the process of alkaline delignification of oat fruit shells in a rotary-pulsation apparatus by the methods of mathematical planning of the experiment. Khimicheskaya tekhnologiya. 2015. V. 16. № 7. P. 443–447 (in Russian).
11. Skiba E.A., Baibakova O.V., Budaeva V.V., Pavlov I.N., Vasilishin M.S., Makarova E.I., Sakovich G.V., Ovchinnikova E.V., Banzaraktsaeva S.P., Vernikovskaya N.V., Chumachenko V.A. Pilot technology of ethanol production from oat hulls for subsequent conversion to ethylene. Chemical Engineering Journal. 2017. V. 329. P. 178–186. DOI:https://doi.org/10.1016/j.cej.2017.05.182
12. Shamin K.I., Chernov A.A., Zotov V.G., Smirnov A.V., Chizhevsky O.T. Compressed bale pulp fluffing device. Patent RU 149010 U1. Publ. 20.12.2014 (in Russian).
13. Veselov V.M., Abramov Y.K., Zalevsky V.M., Tamurka V.G., Vatueva O.B., Volodin V.S., Gukasov N.A., Marshannikova L.M. Method for improving the quality and reactivity of cellulose. Patent RU 2609803 (S1). Publ. 06.02.2017 (in Russian).
14. Chaschilov, D.V. Researching the process of plane cellulose garnetting. Tekhnologii i oborudovanie khimicheskoi, biotekhnologicheskoi i pishchevoi promyshlennosti: materialy XIII Vserossiiskoi nauchno-prakticheskoi konferentsii studentov, aspirantov i molodykh uchenykh s mezhdunarodnym uchastiem. Biysk: AltSTU Publishing House, 2020. P. 224–228 (in Russian).
15. Chaschilov D.V. IInvestigation of the operation of a two-walled horizontal worm-blade mixer in continuous mode in the production of sodium carboxymethylcellulose. Tekhnologii i oborudovanie khimicheskoi, biotekhnologicheskoi i pishchevoi promyshlennosti: materialy XII Vserossiiskoi nauchno-prakticheskoi konferentsii studentov, aspirantov i molodykh uchenykh s mezhdunarodnym uchastiem. Biysk: AltSTU Publishing House, 2019. P. 349–354 (in Russian).
16. Chaschilov D.V., Kashin A.A. About the new variant of the method of testing cellulose for wettability. Tekhnologii i oborudovanie khimicheskoi, biotekhnologicheskoi i pishchevoi promyshlennosti: materialy XI Vserossiiskoi nauchno-prakticheskoi konferentsii studentov, aspirantov i molodykh uchenykh s mezhdunarodnym uchastiem. Biysk: AltSTU Publishing House, 2018. P. 238–243 (in Russian).
17. Vurako, A.V., Minakova A.R., Drikorer, B.N., Spivakov, V.P., Kosacheva, A.M. Tekhnologiya polucheniya tsellyulozy iz nedrevesnogo rastitel'nogo syr'ya [Technology for producing pulp from non-timber vegetation raw materials]. Khimiya rastitel'nogo syr'ya. 2010. V. 14. № 2. P. 165–168 (in Russian).
18. Yusupov F.T., Saythin A.A., Valishin Z.T., Borbuzanov V.G., Motukhin E.L. Improving technologies for promotion, agroagging and conditioning of cellulose materials. Vestnik tekhnologicheskogo universiteta. 2017. V. 20. № 6. P. 76–78 (in Russian).
19. Borbuzanov V.G., Matukhin E.L., Yusupov F.T., Valishitsa Z.T., Kostoyko A.V. Automated preparation complex for cellulose raw materials of a new physical form. Vestnik Kazanskogo tekhnologicheskogo universiteta. 2015. V. 18. № 1. P. 297–299 (in Russian).
20. Antonova N.M., Puzanova A.S., Neratov A.A. Comparative analysis of sheet and modified cellulose structure. Inzhenernyi vestnik Dona. 2020. № 3 (63). P. 39–46 (in Russian).
